Skip to main content

Easy-load DAYTONA custom-built Race Car trailer 3400 kg GVM, complete with front vehicle protection, towing and reverse cameras, lockers, tyre rack, and fuel storage.
5.9m ×2.51m overall, flat checker plate floor: 4.0m from front tyre-stop to rear of tray; 1.94m between side rails, with multiple tie-down options. Tray height 420 mm.
Always shedded; average 1 – 2 uses per year.


Contact: Mark Laucke    08 8536 5555

More Detail:   (more photos below)
Registration: until August 2021. Standard 7 pin vehicle connector plug. LED lighting. 50mm quick release coupling with hand brake. Heavy Duty Safety chains, D shackles, and Jockey wheel.
Breakaway system: TAP “The Engager” system with new battery that charges off Tail/clearance lights.
Suspension: Dexter Independent Rubber Suspension; with “Low ride” axle setting for easy Loading and Unloading: Tray height: 420 mm. Heavy Duty alloy Rollers and Skid Plates fitted to rear corners of chassis.
Axles: two, with Electric Brakes on both axles. Torflex axles by Dexter Axle Australia with E-Z Lube bearings.
Alloy wheels 14x6JJ Ford. Tyres: 195R14 Light Truck. Removable mudguards for car door clearance, with Mudflaps and reflectors.
Electric winch with Battery and remote control. Front storage compartment with hinged Lockable cover that protects the vehicle, and internal 12v power point.
Full-width Cargo rack:  with lockable Tyre rack and 2 large lockable waterproof metal storage boxes. Pair of tray Worklights.
Multiple cameras:  2 Rear view Towing cameras: mounted one each side to display sides and rear, with single wireless display screen for towing vehicle. 1 Rear-mounted Reversing camera with wireless display screen for towing vehicle.
Multiple tray tie-down points, with rails front and both sides, plus 4 Loops at Front, and 4 at Rear.
Side-mounted Storage Box: Lockable. Side-mounted Fuel Drums x 3 of 20 litre metal: Lockable. Side-mounted Spare wheel: Lockable. Side-mounted facility for Compressed gas cylinders.
Alloy ramps: 2 of 220 mm wide by 3m long, mounted in separate Locker underneath tray. Folding Stands to utilise the ramps as a work bench.